Linksys RE6300

Find the r ange extender’s IP address by going to your routef~s administration page and looking for
the range extender under connected devices.
Windows XP:
1. Enable UPnP:
a) Click Start, Control Panel, Add a Remove Program, then dick Add/Remove Windows Components.
b) Select Network Servfces, then cSck Oefails.
c) Select UPnP User Interface, then click OK
2. Open Windows Expbrer. Click My Network Places on the lea panel.
3. L7k for the RE677icorf on the right panel. (You might be required to change the firewall settings
to albw the display of networked computers. Refer to your operating system’s help for instructions)
Windows 8, Windows 7, or VisW:
1. Open Windows Explorer (File Expbrer in Windows 8). Click Networlk Look for the RE677 icon on
the right panel. (You might be required to change the frewaS settings to aSow the display of
networked computers. Refer to your operating system’s help for instructions .)
2. Right-click the RE6700 icon. Click Properfies. Click on the address fink in Device webpage.
Mac OS X:
1. Open Sahri. Be sure that Bonjour is included in the Bookmarks menu and Favorites bar.
a. Go to Safari Preferences > Advanced and be sure each Bonjour box is selected.
2. Find Bonjour in the Bookmarks menu or Favorites bar and choose Linksys Range
Extender. ” If you have changed your network name and password, choose the network
name and enter the password you created.
Using range extender seNings
Click Help cn the right side cf the screen fcr additicnal infcrmation cn the screen~s
options. Ch anges tc settings will net be effective untS you cBck Save at the boffom cf the screen.
You also can click Cancel tc dear any changes.
Using Wi-Fl Protected Setup
WiFi Protected Setup~ makes it easy to connect your extender to your network, and
conned other de~es to your network through the extepder.
Wi-Fi Protected ktup light activity