Product Overview
Front view
The indicator LED on the front of the range extender gives you information about power, updating
and signal strength.
Power Light Status/ description
Blinking Green • Starting up.
• Resetting to factory defaults.
• Upgrading firmware.
Solid Green • Ready to use.
Solid Amber • Weak connection with the router.
Fix: Unplug the extender, and move it closer to the router.
Blinking Amber • Not connected to the router or other error.
Fix:
1.
Make sure your router has an Internet connection and Wi-Fi is turned on.
2.
If the router is in order, unplug the extender, move it closer to the router, plug it
back in, wait one minute, reconnect to your network.
3
To Next Page
Loading...
Need help?
General
