1. Find the end of the coiled phone handset cord
that has the longer straightened end. Plug that
end into the back of the phone base (phone
symbol).
2. Plug in short straightened end of the handset
cord into the jack at the bottom of the handset
(not shown).
3. If you are using an external power source, push
the power cord into the power supply, and plug
the power supply into the phone base unit. Use
only the power supply that came with the phone.
SPA922 &SPA942 can be configured without
external power, if connecting to an IEEE powered
Ethernet switch.
4. Plug the Ethernet cable into the back of the base
station. Plug the other end of the Ethernet cable
into your already prepared network connection in
your Integrated Access Device.
The phone display screen. It
shows the date, time, the phone
number, incoming caller‘s ID
(if available), line/call status,
extension numbers and the soft
button features.
Shows extension number and
status
Press to select an feature shown
in the soft button features.
Shows available choices based
on current phone function.
Displayed on the last line of the
LCD screen.
Allows you to navigate (left,
right, up, down) through the soft
button features.
To Next Page
Loading...
