Wi-Fi Protected Setup™ is a feature that makes it easy to set up your wireless network. If you have client
devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected
Setup to configure wireless security for your wireless network. Otherwise, use manual setup (refer to
“Manual Setup” ).
There are three methods available for Wi-Fi Protected Setup.
1. Use Wi-Fi Protected Setup Button
- Click or press the Wi-Fi Protected Setup button on the wireless client device.
- Within two minutes, click the Wi‑Fi Protected Setup button on the access point’s Wi-Fi Protected
Setup screen.
- After the client device has been configured, click Close.
To Next Page
Loading...
