Chapter 3
Advanced Configuration
30
Wireless-G Broadband Router with 2 Phone Ports
Administration > Username & Password
NOTE: The Router may lose the settings you
have customized. Before you upgrade its
firmware, use the
Config Management screen
to back up the Router’s settings. Refer to the
Administration > Config Management section for
more information.
Firmware Upgrade
Before upgrading the firmware, download the Router’s
firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Administration > Firmware Upgrade
Please select a file to upgrade Click Browse and select
the extracted firmware upgrade file.
Start to Upgrade After you have selected the
appropriate file, click this button, and f
ollow the on-screen
instructions.
Administration > Config Management
The Config Management screen allows you to back up or
restore the Router’s settings using a configuration file.
Administration > Config Management
Backup Configuration
Backup To save the Router’s settings in a configuration file,
click this button and follow the on-screen instructions.
Restore Configuration
To use this option, you must have previously backed up its
configuration settings.
Please select a file to restore Click the Browse button
and select the Router’s configuration file.
Restore To restore the Router’s configuration settings,
click this button and follow the on-screen instructions.
Status > Router
The Router screen displays information about the Router.
Status > Router
Router Information
Firmware Version The version number of the Router’s
current firmware is displayed.
To Next Page
Loading...
