Chapter 3
Advanced Configuration
32
Wireless-G Broadband Router with 2 Phone Ports
Wireless Network 1-2
Status information for each wireless network is displayed.
Wireless MAC Address The wireless MAC address of the
Router’s local, wireless interface is displayed.
Network Name (SSID) The network name, which is also
called the SSID, is displayed.
Security The wireless security method is displayed.
SSID Broadcast The status of the SSID Broadcast feature
is displayed.
Access to the Voice Screens
There are two level of access, user and Admin Login. When
you click the Voice tab, the Info screen is automatically
displayed. If you set a User Password on the System screen,
then you will be asked to enter it before the Info screen is
displayed.
The Admin Login allows access to more advanced settings.
To access administrative screens, click Admin Login, and
enter the user name and password provided by your
service provider. Contact your service provider for more
information. (The factory default Admin Login name and
password are admin.)
NOTE: In most cases, you do not need to use
the administrative screens. Contact your service
provider for more information.
Voice > Info
The Info screen displays Voice over Internet Protocol (VoIP)
information about the Router.
Voice > Info
Product Information
Product Name The model number of the Router is
displayed.
Serial Number The serial number of the Router is
displayed.
Software Version The version number of the Router
software is displayed.
Hardware Version The version number of the Router
hardware is displayed.
MAC Address The MAC address of the Router is
displayed.
Client Certificate The status of the client certificate,
which indicates that the Router has been authorized by
your service provider, is displayed.
System Status
Current Time The current date and time of the Router are
displayed.
To Next Page
Loading...
