Chapter 3
Advanced Configuration
34
Wireless-G Broadband Router with 2 Phone Ports
Voice > System
The System screen displays the User Password setting.
Voice > System
System Configuration
User Password Enter the password for user access to the
Voice screens. (By default, there is no password.)
Miscellaneous Settings
No settings are displayed.
Click Save Settings to apply your change, or click Cancel
Changes to cancel your change.
Voice > User 1/2
The User 1 and 2 screens display similar settings. The User 1
screen displays settings for users of phone line 1, and the
User 2 screen displays settings for users of phone line 2.
Voice > User 1
Call Forward Settings
Enter the call forwarding numbers you want to use.
Cfwd All Dest Enter the number for the Call Forward All
Service feature (when you want to forward all calls).
Cfwd Busy Dest Enter the number for the Call Forward
Busy feature (when the line is busy).
Cfwd No Ans Dest Enter the number for the Call Forward
No Answer feature (when the line is not answered).
Cfwd No Ans Delay Enter the number of seconds to wait
before the Call Forward No Answer feature is triggered.
The default is 20.
Selective Call Forward Settings
Enter the caller numbers that will be forwarded to specific
phone numbers.
Cfwd Sel1-8 Caller Enter the caller number pattern to
trigger the Call Forward Selective (1-8) feature.
Cfwd Sel1-8 Dest Enter the forward number for the Call
Forward Selective (1-8) feature.
Cfwd Last Caller Enter the caller number that is actively
forwarded to the Cfwd Last Dest number when the Call
Forward Last activation code is used.
Cfwd Last Dest Enter the forward number for the Cfwd
Last Caller feature.
Block Last Caller Enter the ID of the caller blocked via
the Block Last Caller service.
Accept Last Caller Enter the ID of the caller accepted via
the Accept Last Caller service.
Speed Dial Settings
Speed Dial 2-9 Enter the phone number for each Speed
Dial setting.
Supplementary Service Settings
CW Setting Select whether you want to use the Call
Waiting feature for all calls, yes or no. The default is yes.
Block CID Setting Select whether you want to block
Caller ID for all calls, yes or no. The default is no.
Block ANC Setting Select whether you want to block
anonymous calls, yes or no. The default is no.
DND Setting Select whether you want to use the Do Not
Disturb (DND) feature, yes or no. The default is no.
CID Setting Select whether you want to enable Caller ID
generation, yes or no. The default is yes.
CWCID Setting Select whether you want to enable Caller
ID for Call Waiting, yes or no. The default is yes.
To Next Page
Loading...
