EasyManuals Logo

Linksys WRT54G User Manual

Linksys WRT54G
1020 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
11
Chapter 4: Connecting the Wireless-G Broadband Router
Hardware Installation for Connection to Another Router
Wireless-G Broadband Router
9. Decide which network computers or Ethernet devices you want to connect to the Router.
Disconnect the selected computers or devices from the other router, and then connect them to the Router’s
numbered ports using standard Ethernet network cabling.
10. Connect the A power adapter to the Router's Power port and the other end into an electrical outlet. Only use
the power adapter supplied with the Router. Use of a different adapter may result in product damage.
Now that the hardware installation is complete, proceed to “Chapter 5: Setting up the Wireless-G
Broadband Router,” for directions on how to configure the Router using the Setup Wizard (Chapter 4
covers the instructions for up to Step 7 in the Wizard.
To set up the Router using its Web-based utility, proceed to “Chapter 6: Configuring the Wireless-G
Broadband Router.
IMPORTANT: Make sure you use the power
adapter that is supplied with the Router. Use of a
different power adapter could damage the Router.
Figure 4-6: Connecting Your Network Devices
Figure 4-7: Connecting the Power

Table of Contents

Other manuals for Linksys WRT54G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys WRT54G and is the answer not in the manual?

Linksys WRT54G Specifications

Power IconPower
power output18 dBm
power supplyExternal, 12V DC, 0.5A
Operating Environment IconOperating Environment
operating temperature0° C to 40° C (32° F to 104° F)
storage temperature-20° C to 70° C (-4° F to 158° F)
operating humidity10% to 85% Non-Condensing
storage humidity5% to 90% Non-Condensing
Ports & Interfaces IconPorts & Interfaces
internet portOne 10/100 RJ-45 Port
lan portsFour 10/100 RJ-45 Switched Ports
power portOne Power Port
Weight and Dimensions IconWeight and Dimensions
dimensions7.32” x 1.89” x 6.06” (186 x 48 x 154 mm)
weight13.09 oz. (371 g)

Related product manuals