Need help?Do you have a question about the LinMot C1250 Series and is the answer not in the manual?
Information on the Protective Earth connection for safety and grounding.
Details the X1 connector for motor power supply and its wiring requirements.
Describes the X2 and X3 connectors for motor phases and sensor/brake connections.
Details the X4 connector for logic supply and I/O connections.
Information on the X13 connector for external position sensors and differential hall switches.
Details the X17 and X18 connectors for RealTime Ethernet communication.
Describes the X19 connector for system interface, typically RS232.
Details the X33 connector for safety relays and STO functionality.
Information on S1-S2 address selectors for drive configuration.
Describes the S5 switch for bootstrap mode, intended for internal use.
Explanation of the status displays provided by the drive's LEDs.
Details the RT Bus LEDs for indicating the status of the real-time bus.
Details the voltage and current requirements for the motor power supply.
Details the voltage and current requirements for the logic signal power supply.
General| Brand | LinMot |
|---|---|
| Model | C1250 Series |
| Category | Servo Drives |
| Language | English |
To Next Page