Setting Up The lion alcolmeter
®
600
Batteries
The lion alcolmeter® 600 is powered by four alkaline AA dry
batteries. These are loaded into the instrument using the battery
pack.
To release the battery pack, push the button on the rear of the
instrument and pull the battery pack out of the instrument.
The batteries must be orientated so that the positive terminal of
the battery is against the plate contact, and the negative terminal is
against the spring contact. This is clearly shown in the diagram
moulded into the battery pack itself.
Once the batteries are securely loaded into the battery pack, this
can be loaded into the instrument and slid home until it locks in
place with a click. Please replace all four batteries with new
batteries at the same time to avoid uneven loading.
To Next Page
Loading...
