How to troubleshoot Lippert Components Jacks when there is no power to the touchpad?
If there's no power to the touchpad, check if the circuit breaker has tripped and reset it. Also, ensure the ignition is turned on.
General| Brand | Lippert Components |
|---|---|
| Model | LCI |
| Category | Jacks |
| Language | English |
Read and understand all instructions and adhere to safety labels before operating.
Details on automatic/manual leveling, retraction, and airbag suspension features.
Recommended fluid type and description of major system components like jacks and pump.
Specifications for battery power, ground, logic power, and brake signal wiring.
Specifications and images for various steel leveling jacks with different capacities.
Specifications and images for various aluminum leveling jacks with different capacities.
Diagrams and labels for the motor, solenoid, and other components of the power unit.
Conditions that must be met before operating the leveling system.
Advice on choosing a level surface and potential issues with slopes.
Step-by-step instructions for the automatic leveling cycle.
Procedures for manually extending and retracting jacks to level the coach.
Steps to fully retract all jacks to their stowed position.
Detailed explanation of each button and indicator light on the touchpad.
Information on automatic safety shutoff, drive away protection, and error modes.
Procedure to set the system's reference point for automatic leveling.
Steps to enable or disable air and auxiliary features for specific units.
How to manually extend or retract jacks using an Allen wrench.
Using a drill for manual jack operation during electrical system failure.
Explanation of the "Jacks Down" alarm, user alarm mode, and automatic retract.
Interpreting the low voltage indicator and troubleshooting charging system issues.
Routine checks and lubrication for the leveling system components.
Identifying and resetting the "Latched Out" error mode.
A chart detailing 'What Is Happening', 'Why', and 'What Should Be Done' for common problems.
Schematic showing the hydraulic hose connections for the leveling jacks.
Overview of electrical connections between the touchpad, controller, and power unit.
To Next Page
