Solera
®
Awning
Smart Arm
Installation and Owner’s Manual
(For Aftermarket Applications)
www.lci1.com 574-537-8900
Page 13
Solera® Awning Smart Arm Aftermarket Manual
NOTE: The motor’s internal drive system prevents the
awning from moving (extend or retract) on its own� If the
motor is damaged or disabled, be sure to secure the
awning in the retracted position with a strap around both the
outer arm and the mount arm before the manual override
nut is released�
Maintenance
Fabric Care
If the awning is retracted while wet, extend the awning and
let it dry as soon as conditions allow before retracting� This
will help prevent the formation of mildew and add greatly to
the life of the awning�
NOTE: Mildew does not form on the fabric itself, but on the
accumulated dust, dirt and grime�
Periodically clean vinyl or woven acrylic fabric using a
mixture of 1/4 cup of dish soap and 5 gallons of warm
water�
1. Liberally apply the mixture on the top of the fabric and
retract the awning for 5 minutes� This will apply the mixture
to the bottom of the fabric as well�
2. Extend the awning and hose off with fresh water�
3. Repeat if necessary�
4. Allow to dry before retracting�
Additional Information
Sources
Additional information about this product can be obtained
from www�lci1�com/support or by downloading the free
myLCI app� The app is available on iTunes® for iPhone®
and iPad® and also on Google Play™ for Android™ users�
iTunes®, iPhone®, and iPad® are registered trademarks of
Apple Inc�
Google Play™ and Android™ are trademarks of Google
Inc�
Notes
To Next Page
Loading...
Need help?
General
