Lippert Cosmo 2 Euro - Mounting the Pedestal to the Floor

Rev: 08.31.23 Page 9 CCD-0007174
20. Secure the table top to the slide support's outside rails with OEM-supplied hardware (Fig. 12A)
appropriate for the material and thickness of the table top.
21. Place the pedestal on the floor where it will be mounted.
22. Raise and secure the lower leg covering in-place (Fig. 13).
23. Depending on the type of OEM-supplied fasteners, attach the pedestal to the floor.
A
Fig. 12
Fig. 13
Lower Leg Covering
Base Plate
Floor