Lippert Unity X4 - Generator Genie Configuration; Setting Up Generator Genie; RGB and Dimming Lighting Configuration; Configuring RGB and Dimming Lights

Rev: 05.06.23 Page 23 CCD-0007005
RGB and Dimming Lighting Control
RGB and dimming lights (Fig. 70) are latching relays and are configured the same as latching relay functions.
See Latching Relay section.
Fig. 68
4. Tap UNKNOWN Generator Genie (Fig. 64C).
5. Under TYPE tap UNKNOWN (Fig. 68A) and change the name to Generator (Fig. 69A).
6. Tap SET (Fig. 69B) to save the Generator Genie changes.
Fig. 69
Fig. 70
A
A
B