This Listo product is compatible with the brands mentioned*
(* brands belonging to third parties unrelated to Sourcing & Creation)
TROUBLESHOOTING
Before contacting your after-sales service, carry out the following basic checks.
Symptoms Possible causes Solutions
No power.
The power cord is not plugged
in.
Make sure the power cord is
plugged into the wall outlet.
The power point is
disconnected from the power
supply.
Try plugging the TV into
dierent power outlets to cross-
check them.
No picture or sound.
The picture settings are poorly
adjusted.
Check the image brightness and
contrast settings.
Sound is o.
Make sure that the Mute mode
is not activated
The TV is not turned on. Turn on the TV.
There are no HD
DTT channels or the
image is distorted.
The reception of digital
terrestrial television (DTT)
channels is only possible in the
areas with coverage. Check
the proximity of a transmitter.
Check the quality and strength
of the receiving signal.
Have your installation checked
by a professional.
V.1.0 106
To Next Page
