19
EASY GUIDER
Note:
For Timer Record, there are six recording modes: HQ, SP, LP,
EP, SLP and Just Fit. When the recording mode is set as “Just
Fit,” the recording mode will be automatically adjusted depend-
ing on how much recording space is available on the disc or the
HDD.
Timer Record (ShowView
®
Setting)
1. Press [ GUIDER] to display the Easy Guider menu.
2. Press [p] [q] to select “Timer Record” and
then press [ENTER].
3. Press [p] [q] to select “ShowView Setting” and
press [ENTER].
4. Press [p] [q] to select once, daily or weekly
and press [ENTER].
5. Use the numbered buttons to enter the PlusCode
and then press [ENTER] . Press [p][q] to set the
PDC mode on or off and press [ENTER].
6. Press [p][q] [t] [u] or the numbered buttons
(0~9) to set the date and press [ENTER] when done.
7. Press [p][q] [t] [u] or the numbered buttons
(0~9) to set the time and press [ENTER] when
done.
8. Press [p][q] to set “Length” and then press [ENTER] .
9. Press [p][q] to select “HDD” or “DVD” and then
press [ENTER] .
10.Press [p] [q] to select a recording disc format and
press [ENTER].
If you select “DVD,” press [p] [q] to select a recording disc
format and press [ENTER]. For CD-R/RW discs, select the same
format the disc is first prepared as. (SVCD, VCD or Audio CD) For
DVD disc, select “DVD-VR” format.
11.Press [p] [q] to select a recording mode and
press [ENTER].
12. Press [p] [q] to select TV audio and press
ENTER].
13. The “Timer Record information” will appear and
press [ENTER] to c exit the timer record
settings.
14. Press [ POWER] to turn the recorder off
toactivate Timer Record function.
Note:
1. When you first play a recordable CD-R disc or an empty CD-RW
disc on the disc tray, select a disc format the disc is to be
prepared as: SVCD, VCD, Audio CD or Data CD. The format
selected determines the
recording quality.
2. When a recordable DVD-RW
is used for recording, you need
to first select either “Quick
preparation” or “Full prepara-
tion” and press [ENTER] for the
disc to be prepared for
recording.
To Next Page
Loading...
