43
GUI OPERATION
Language
OSD
Select a system operating language. The options are :
English, Français, Deutsch,
Italia, Español, Nederlands, Dansk, Suomi,
Svenska, Polski, Norsk, ?????????, Português
Menu Language
Select a menu operating language. The options are :
English, Chinese, French, German, Italian, Spanish,
Danish, Dutch, Polish, Swedish, Finn, Portuguese,
Norwegian, Greek
Audio Language
Select a menu operating language. The options are :
English, Chinese, French, German, Italian, Spanish,
Danish, Dutch, Polish, Swedish, Finn, Portuguese,
Norwegian, Greek
Subtitle Language
Select a subtitle operating language. The options are :
English, Chinese, French, German, Italian, Spanish,
Danish, Dutch, Polish, Swedish, Finn, Portuguese,
Norwegian, Greek
Playback
Aspect Ratio
Settings of audio and video parameters when playing back.
16:9 Wide 4:3 Pan 4:3 L.Box (Default)
Parental
Set content control for supported DVD.
Set Level (Off , 1~8 ) (Default: off)
The parental control levels are:
1: Kid Safe 2: G 3: PG
4: PG-13 5: PG-R 6: R
7: NC-17 8: Adult Off (Default)
Password
Set a system protect password. Password is needed for the
changing the setting.
OLD Password (XXXX) NEW Password (XXXX)
Confirm (XXXX) *(Default:0000)
Slide Time
Set the slide show interval while playing JPEG files.
Off 3~99 Seconds (Default: 5)
VCD PBC
Enable/Disable play back control for VCD and SVCD.
ON (Default) OFF
System
Video Output
Switch video output signal.
SCART S-Video
SCART RGB(Default)
COMPONENT
Progressive
Note: If you are connecting the DVD recorder to the TV via
the SCART out jack, set the VIDEO OUTPUT as
either “SCART S-Video” or “SCART-RGB.” If you are
connecting the DVD recorder to the TV via the
COMPONENT out jack, set the VIDEO OUTPUT as
“COMPONENT.”
TV Type
Select type of the TV output.
NTSC PAL(Default)
Clock Format
Select the clock format to set the system clock.
M/D/Y-12Hr D/M/Y-12Hr Y/M/D-12Hr
M/D/Y-24Hr D/M/Y-24Hr Y/M/D-24Hr
Date
Set the date of the system clock.
Time
Set the time of the system clock.
HH:MM:SS AM/PM
Auto-Sleep
Off/30/60/90/120mins(Default: 120 mins)
Note:
“Auto sleep” sets how long the DVD recorder is switched to
“STANDBY” mode when no operation of the system is
detected (e.g. recording, playback, timer record or editing).
Restore
---- (Off) Restore
Audio
Digital Output
Settings of digital audio output.
PCM (Enable digital audio output with PCM data)
Bit Stream (Enable digital audio output with encode
data)(Default)
DTS Output
Enable/Disable Digital Theater System output.
ON (Enable Digital Theater System mode)
OFF (Disable Digital Theater System mode) (Default)
MPEG
PCM (Default) Bit Stream
Surround
Stereo Dolby(Default) DTS
TV Audio
Main Stereo (Default)
SAP (Second Audio Program) Mono
繁體中文, 簡體中文,
To Next Page
Loading...
