18
EASY GUIDER
Record on a disc
Make sure a recordable disc is inserted before recording.
1. Press [ GUIDER] to display the Easy Guider
menu.
2. Press [p] [q] to select “Record” and then
press [ENTER].
3. Press [p] [q] to select the Signal-Input (TV,
Front AV, SCART, DV ) and press [ENTER].
If you select “TV,” press [p] [q] to select the channel you want to
record and press [ENTER].
4. Press [p] [q] to select “DVD” and press
[ENTER].
5. Press [p] [q] to select the disc recording format
and then press [ENTER].
If a CD-R or CD-RW is used for recording, you need to select
VCD, VCD or Audio CD. If a DVD disc is used for recording, you
need to select “DVD VR” format.
When a DVD disc is used for recording, after selecting the
recording format, press [p] [q] to select a recording mode and
then press [ENTER].
If you select “TV” in step 3, press [p] [q] to select TV audio and
press [OK].
6. Press [ENTER] to start recording.
Press [ STOP] to stop recording.
Press [ PAUSE] to pause recording.
Note:
1. If a new recordable CD-R or an empty CD-RW is used for
recording, press [t] [u] [p] [q] to select a disc format the
disc is to be prepared as and press [ENTER] : SVCD, VCD,
Audio CD or Data CD.
Timer Record (Date/Time Setting)
1. Press [ GUIDER] to display the Easy Guider
menu.
2. Press [p] [q] to select “Timer Record” and
then press [ENTER].
3. Press [p] [q] to select “Date/Time Setting” and
press [ENTER].
4. Press [p] [q] to select the Signal-Input ( TV,
Front AV, SCART, DV) and press [ENTER].
If you select “TV,” press [p] [q] to select the channel you want to
record and press [ENTER]. Press [p] [q] and [ENTER] to set the
PDC model on or off.
If you select “AV or SCART,” press [p] [q] to set PDC mode on or
off.
5. Press [p][q] to select “Once,” “Daily,” or “Weekly.”
2. When a recordable DVD-RW is used for recording, you need
to first select either “Quick preparation” or “Full preparation” and
press [ENTER] for the disc to be prepared for recording.
To Next Page
Loading...
