38
EDIT
Splitting a title (HDD, DVD+RW or DVD-RW only)
Use this function to divide a title into two distinct sessions. After
split, the new title can still be merged again. This function is
only applicable to titles with length longer than 6 seconds.
1. Press [BROWSER] to display the “Browser”
menu.
2. Press [t] [u] [p] [q] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
3. Press [uPLAY] to start the title playback first.
Press [ NEXT] or [ PREVIOUS] to advance
to the next chapter or the previous chapter.
Press [ F.F.] or [ REW ] to perform fast
forward or fast rewind scanning.
4. Move the highlighted cursor to “split” and press
[ENTER] for confirmation.
The title is split into two titles at where you press [ENTER]
during playback.
5. When complete, the browser menu will be displayed.
6. To split more titles,
repeat from step 2 to
4. Or press [p] [q] to
select “EXIT” and
then press [ENTER] to
exit the setting.
Note:
The split function is only
applicable to video titles
longer than 6 seconds.
Merging two titles into one (HDD, DVD+RW and
DVD-RW only)
Use this function to merge two titles into one.
After merged, the new title can still be split again.
1. Press [BROWSER] to display the “Browser” menu.
2. Press [t] [u] [p] [q] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
3. Press [p] [q] to select “Merge” and then press
[ENTER].
A menu shows all the titles applicable to this function will
display.
4. Press [t] [u] [p] [q] to select the title to merge
and then press [ENTER].
5. To merge more titles, repeat from step 2 to 4. Or
press [p] [q] to select “EXIT” and then press
Erasing a title (HDD and DVD only)
Use this function to erase a title.
Note that once erased, the title(s) cannot be retrieved.
1. Press [BROWSER] to display the “Browser” menu.
2. Use [t] [u] [p] [q] to select the title you want to
edit and then press [EDIT] to go to the edit screen.
3. Press [p] [q] to select “Erase.”
4. Press [ENTER] to confirm your setting.
The title selected is erased.
5. To erase more titles, repeat from step 2 to 4. Or
press [p] [q] to select “EXIT” and then press
[ENTER] to exit the setting.
Note:
You can NOT erase recorded title(s) on a DVD+R, DVD-R or
DVD-RW disc if the disc is finalized.
Note:
1. For video titles recorded on a DVD+RW or a DVD-RW disc,
you can only merge the title with its previous/next title and only
when the previous/next title has the same recording quality, TV
signal, audio and video settings. Otherwise, the function will not
be applicable.
2. For video titles recorded on the built-in HDD, you can merge
the title with any of the titles recorded on the HDD with the
same recording quality, TV signal, audio and video setting.
Setting a title thumbnail (HDD and DVD only)
Normally the first picture of a recording is used as the index
picture. However, you can choose any picture from the recording
as the index picture.
1. Press [BROWSER] to display the “Browser” menu.
2. Use [t] [u] [p] [q] to select the title you want to
edit and then press [EDIT] to go to the edit screen.
3. Press [uPLAY] to start the title playback first.
Press [ NEXT] or [ PREVIOUS] to advance to
the next chapter or the previous chapter.
Press [ F.F.] or [ REW ] to perform fast
forward or fast rewind scanning.
Press repeatedly to play the title forward or reverse.
To Next Page
Loading...
