LiteOn LVW-5045 - Recording; Before Recording; Recording Television Programs

21
4. Press [RECORD] to start recording.
When recording is completed it may take a few
moments for the session to close.
Recording continues until you stop the recording or when the
disc or the HDD is full.
To stop recording
When you press [ STOP] , it may take a few moments for
recording to stop and the session to close.
To pause recording
Press [ PAUSE] to pause recording, and press [
PAUSE] again to resume recording.
To change the recording mode before recording:
Press [SETUP] button.
To change the TV Audio setting before recording:
Press [SETUP] button.
Notes:
1. The new setting can't change the current recording mode but
will be activated during the next recording session.
2. When a recordable DVD-RW is used for recording, you need
to first select either “Quick preparation” or “Full preparation” and
press [ENTER] for the disc to be prepared for recording.
To check the disc status while recording
Press [DISPLAY] , the recording information appears.
Before recording
1. This DVD recorder records on DVD+R/+RW, DVD-R/-RW,
CD-R/RW discs and the built-in HDD. Please use
recommended recordable discs to ensure the best
recording quality. Check our Web site for the recommended
disc list.
2. DVD+R, DVD-R and CD-R are write-once discs.
3. DVD+RW, DVD-RW and CD-RW are a re-writable discs.
4. You cannot add new recording sessions to DVD+R, DVD-R
or DVD-RW discs after the discs are finalized.
5. In some cases, you may not be able to add new recording(s)
to a recordable DVD disc that contains contents written on
other DVD recorders.
6. A disc records 49 video titles maximum. A title recorded
on a DVD disc contains 99 chapter marks maximum. And a
disc contains 254 chapter marks totally maximum.
7. A title recorded on the built-in HDD contains 999 chapter
marks maximum.
RECORDING
Cautions:
Recording television programs
1. Press [ POWER] to turn the unit on.
2. Press the [HDD/DVD] button to set the target
device as “HDD” or “DVD.”
If “DVD” is selected as the target device, press [ OPEN/
CLOSE] to open the disc tray and insert a recordable disc.
Press the button again to close the tray.
When you insert a new recordable DVD disc, the DVD recorder
automatically starts the disc preparation process.
When you insert a new recordable CD-R or CD-RW disc, press
[t] [u] [p] [q] to select the disc format the disc is to be
prepared as.
3. Press [SOURCE] and press [p] [q] to select “TV”
as the signal-input source.
4. Press [ CH ] or press [p] [q] to select the
TV channel you want to record.
Notes:
You can also use the numbered buttons to select a channel.