7
CONTROLS AND DISPLAYS
Rear panel connections
(for reference only)
Names of parts
1) VHF/UHF IN/OUT Jacks
Antenna cables input and output.
Note: DVD signals don’t go through here. Make
proper connections before use.
2) SCART IN Jack
Composite/RGB signal input.
3) SCART OUT Jack
Composite/RGB/S-Video signal output.
4) LINE OUT (VIDEO/AUDIO L/R) Jacks
Composite signal output.
5) LINE OUT (COMPONENT) Jack
Component signal output.
6) DIGITAL OUT (COAXIAL) Jack
Connect to an amplifier or a receiver having a digital
output jack.
7) DIGITAL OUT (OPTICAL) Jack
Connect to an amplifier or a receiver for a digital
output jack.
8) AC IN Terminal
Connect the power cord.
To Next Page
Loading...
