Operating manual and inspection booklet
Camping
3532085 113
Fig. 85: Gas bottle locker
Fig. 86: Gas bottle with pressure reducing
valve
1. Open the gas locker.
2. For changing an empty gas bottle, close the valve at the
empty bottle.
3. Manually unscrew the union nut of the gas bottle valve (note
the left-handed thread).
4. Loosen the fastening belt of the gas bottle and remove the
bottle from the gas locker.
5. Inspect the gas hose. If it is porous or damaged, have it
replaced by qualified personnel.
6. Place the new gas bottle in the locker and secure with
fastening belts.
7. Manually screw the cap nut of the pressure reducing valve
tightly onto the gas bottle valve.
8. Close the gas locker and engage the lock.
9. In order to operate the gas appliances, open the gas bottle
valve and the applicable quick-action valve.
6.1.7 Gas supply maintenance (general)
Repeat the gas supply inspection pursuant to applicable
regulations (every two years in Germany, for example).
Replace the gas pressure regulator set and the hoses at the
latest ten years after their manufacturing dates.
To Next Page
Loading...