Operating manual and inspection booklet
Overview
3532085 91
Querying tank levels
1. Touch the corresponding sensor button.
The filling level of the corresponding tank is displayed (for as long
as the sensor button is being touched):
Water: 100%, 75%, 50%, 25%;
if the 25% LED flashes after querying, the tank is empty.
Waste water: 100%, 75%, 50%, 25%
Tank filling mode
In tank filling mode, the values are continuously displayed for a
certain duration (water 5 min, waste water 3 min) and queried in
real time. This allows the level to be continuously checked during
filling or emptying of the tank.
1. Briefly sequentially touch the corresponding sensor button
twice.
The respective tank filling mode is enabled - the values are
continuously displayed and updated in real time.
2. Briefly touch the corresponding sensor button once.
Tank filling mode is exited.
NOTE
Tank filling mode is automatically exited after 3
respectively 5 min has elapsed.
Battery type and capacity of the living space battery
NOTE
The battery type is set in the factory.
To Next Page
Loading...