Reference 55
User guide
english
14
Initial installation wizard
Initial installation after switching on for the first time
The Initial installation wizard starts automatically with an initial instal-
lation. It may be called repeatedly again.
If a parental lock is activated, the access code must be entered
before repeating initial installation.
First installation wizard routine
The selected settings affect the routine of the Initial installation wizard.
Select desired Menu language.
Selecting the language of the user guidance is the
wizard’s first step. Then you simply follow the instruc-
tions on your TV screen.
Proceed to next step.
Select Energy efficiency.
Determine how energy efficient your TV set shall
be. The value for the contrast (and thus the bright-
ness of the background lighting) is adapted and
the automatic dimmer activated or deactivated
depending on the presetting.
Deutsch (de) ǼȜȜȘȞȚțȐ (el) Svenska (sv)
English (en) Polski (pl) Dansk (da)
Français (fr) Magyar (hu) Português (pt)
Italiano (it) Suomi (fi) ȇɭɫɫɤɢɣ (ru)
Español (es) Slovenščina (sl) Norsk (no)
Nederlands (nl) Slovenčina (sk) 中文(zh)
Čeština (cs) Türkçe (tr)
INITIAL INSTALLATION - Menu language
Proceed with
Which menu language do you want to use for operation?
Menu
language
Here you define how energy efficiently you operate your TV. With the "Home Mode"
setting you put the focus on low energy consumption for home use. The "Premium Mode"
is optimised to a brighter environment with a higher energy consumption. The "Shop
Mode" is designed for operation in a showroom.
Note: If you select "Home Mode" here, the TV set will automatically switch off to save
energy after no longer being operated for 4 hours.
Energy efficiency
Back with Proceed with
Home mode Premium mode Shop mode
Energy
efficiency
Home mode:
The emphasis for home use is on low energy consump-
tion. The automatic dimmer is activated.
Premium mode:
This mode optimises the settings to a brighter environ-
ment at a higher energy consumption. The automatic
dimmer is activated.
The use of this energy efficiency setting must be con-
firmed afterwards once again.
Shop mode:
The picture settings are aligned to operation in the
presentation room. The automatic dimmer is deacti-
vated. If the ambient brightness diminishes, the energy
consumption is not reduced.
The use of this energy efficiency setting must be con-
firmed afterwards once again.
The presetting can be changed later in System set-
tings under Control ט Energy efficiency.
Proceed to next step.
Select Location of TV set.
For certain locations (e.g., Australia), there
is finally a selection screen where you can
indicate in which state/territory the device
is being operated.
Proceed to next step.
Follow the instructions on the screen for the following
steps.
With the selection of the TV set location the country-
specific presettings are adopted.
In most cases, the predetermined parameters can
be adopted.
Energy
efficiency
(continued)
Please specify the location of your TV set so that the available stations can be sorted
according to the specify country.
Location of TV set
Back with Proceed with
(DK) Denmark
(E) Spain
(F) France
(FIN) Finland
(H) Hungary
(I) Italy
(IRL) Ireland
(L) Luxembourg
(N) Norway
(NL) Netherlands
(NZ) New Zealand
(P) Portugal
(PL) Poland
(RUS) Russia
(S) Sweden
(SK) Slovakia
(SLO) Slovenia
(TR) Turkey
(UK) United Kingdom
Other country
Location of
TV set
Initial installation
To Next Page
Loading...
Need help?
General