Reference 55
User guide
english
43
Functions
Timer
In the timer menu you will find the Timer List and the Timer Services.
All programmed recordings, earmarked programmes and copy jobs
are listed in the timer list.
The timer services menu offers you convenient alarm services.
Calling the timer menu
HOME: Calling the Home view.
Select TV,
select Timer (at sources),
OK call.
Or:
press longer: call the timer menu.
Select Timer list or Timer Services (see
right column).
Add new
You can also programme new recordings, earmark
other programmes and copy pre-recorded pro-
grammes from the DR+ archive to an external USB
hard disk by means of the timer list.
When you have programmed timer recordings,
the TV set can only be switched off to the standby
mode. Never switch the TV set off at the mains
and do not pull out the plug of the TV set out of
the socket. Otherwise no timer recordings can
be made.
When a software update occurs it may happen
that timer entries and memorised programmes
are deleted. After such a software update, check
your timer list.
Explanation of the symbols in the timer list:
Recording
Recording in progress
Memorised programme
Repeated recording (daily, weekly or Mon-Fri)
Series recording
22.12. 10:32 - 11:00 ProSieben How I Met Your Mother
22.12. 12:15 - 12:44 ProSieben Malcolm mittendrin
22.12. 20:15 - 21:15 RTL Television Wer wird Millionär?
23.12. 20:00 - 20:15 Das Erste HD Tagesschau
Timer
Add new
Timer list Timer Services
Mon
Mon
Back
>All entries
Delete / change programmed timer instruction
Use this function in the timer list if you want to delete recordings al-
ready programmed, end a running timer recording or change a timer
instruction.
The timer menu is displayed.
Mark desired timer instruction.
The text of a currently active timer instruction is red.
If you delete this timer instruction, the recording is
stopped.
OK Change marked timer instruction.
The timer data is displayed.
Or:
STOP: Delete marked timer instruction.
OKConfirm delete.
Timer Instruction is deleted.
Timer Services
Programmed alarms are also active when the TV set has been switched
off to standby.
If the TV set is switched on from the standby mode by alarm, a screen
message appears. If this is not confirmed within 5 minutes with the
OK key, the TV set switches automatically off again for safety reasons.
The TV set can also be switched off automatically at certain times.
A screen warning appears one minute before automatic switch off.
The automatic switch off can be interrupted by pressing any key.
The timer menu is displayed.
Mark Timer Services.
Select the desired setting,
OK change.
OK adopt.
Switch off once no yes, at ??:??
Switch off daily no yes, at ??:??
One-time alarm no yes, at ??:??
Wake up Mon-Fri no yes, at ??:??
Wake up Sat no yes, at 15:??
Wake up Sun no yes, at ??:??
Wake up with TV Radio
Timer Iist Timer Services
Back
Timer
Adopt with
OK
To Next Page
Loading...
Need help?
General