Logic II Series

Installation Manual WTS3 Series II
M013610b.doc 1
LOAD CELL WEIGHT TRANSMITTER
MOD.
WTS3
(SERIES II)
OPERATION AND INSTALLATION MANUAL
WTS3 load cell conditioner has been designed to meet the different weighing plants requirements.
Extremely simple installation and ease of use enable this instrument to be installed immediately
and effectively.
Its reliable and precise nature make it suitable for use in the most demanding conditions and
hence ideal for industrial applications.
Logic S.r.l.
Via del Tovo, 5/3
27020 Travacò Siccomario (PV)
WTS3-IIS ....................................
S.N. .......................................

Logic II Series Specifications

General

Brand	Logic
Model	II Series
Category	Transmitter
Language	English

Summary

Product Overview and Specifications

WTS3 General Description

Overview of the WTS3 load cell conditioner and its application.

General Technical Specifications

Key technical parameters, input/output ranges, and operating conditions.

Operation, Setup, and Compatibility

Application and Principle of Operation

How the WTS3 functions as a load cell amplifier and transmitter.

Electromagnetic Compatibility (EMC)

EMC compliance and installation recommendations for radio interference.

Set Up: Switch SW3 Selection

Configuration guide for SW3 switches to set output range, filter, and amplification.

Wiring, Controls, and Calibration

Terminal Board Connections

Detailed diagram and explanation of terminal connections for power and signals.

Electrical Connections

Wiring instructions and load cell cable color code correspondence.

Trim-Pots and Rotary Switch Function

Explanation of the function and use of trim-pots and rotary switches for adjustment.

Calibration Procedure

General steps for calibrating the WTS3 transmitter's zero and span.

Range Calibration 0-10 V and 4-20 mA

Specific steps for calibrating the 0-10V and 4-20mA output ranges.

Range Calibration 0-10 V and 0-20 mA

Specific steps for calibrating the 0-10V and 0-20mA output ranges.

Physical Specifications and Compliance

Mechanical Dimensions WTS3

Physical dimensions and layout of the WTS3 model.

Mechanical Dimensions WTS3-B

Physical dimensions and layout of the WTS3-B model.

Declaration of Conformity

Official statement confirming the product meets EU directives and harmonized standards.