Logik L17MSB13E User Manual

57
GB
Clock Setting
When the microwave is connected to the mains power, the LED display will show ”0:00” and
the microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock/Pre-Set button, the hour
digits will ash. The unit will also beep.
2. Turn the Timer/Weight/Auto Menu dial
to adjust the hour digits. The input time
should be within 0-23.
3. Press the Clock/Pre-Set button, the minute
digits will ash. The unit will also beep.
4. Turn the Timer/Weight/Auto Menu dial
to adjust the minute digits. The input time
should be within 0-59.
5. Press the Clock/Pre-Set dial to nish clock
setting. The unit will also beep.
“:” will start ashing and the time will
illuminate.
• This is a 24-hour clock. When the
microwave is connected to the
mains power for the rst time or
when the power is resumed after
a power interruption, the LED
display will show “0:00”. To re-set
the clock, simply follow the above
5 steps.
• In the process of clock setting, if
the stop/clear button is pressed
or if there is no operation within
1 minute, the microwave will
go back to the previous status
automatically.
• If the clock needs to be reset,
please repeat steps 1 to 5.
• To nd out the current time while
the microwave is operating, press
the clock/pre-set button. It will last
for 3 seconds and then return to its
original display.
Start/
+30Sec./Conrm
T
i
m
e
r
W
e
i
g
h
t
A
u
t
o
M
e
n
u
Clock/Pre-Set Stop/Clear
Microwave
Weight/
Time Defrost
1,3,5
2,4
L17MSW13E_IB_130506_Shaun.indb 57 06/05/2013 11:23 AM

Logik L17MSB13E Specifications

General

Brand	Logik
Model	L17MSB13E
Category	Microwave Oven
Language	English