61
Start/
+30Sec./Conrm
T
i
m
e
r
W
e
i
g
h
t
A
u
t
o
M
e
n
u
Clock/Pre-Set Stop/Clear
Microwave
Weight/
Time Defrost
7
2,6
4,5
3,4,5
1
Delay Start Cooking (Programme Set In Advance)
For Delay Start Cooking, please follow the steps below.
For instance: If the current time is 12 o’clock (noon) and you want to cook it with 80%
microwave power for 5 minutes at 1:30 o’clock in the afternoon.
1. Press the Microwave button once and the
LED display will show “P100”. Press the
Microwave button repeatedly until the LED
display shows “P80”.
2. Press the Start/+30Sec./Conrm button to
conrm the microwave power level.
3. Turn the Timer/Weight/Auto Menu dial to
adjust cooking time until the LED display
shows “5:00”.
You can set a maximum of 2 stages for delay start cooking, defrost cannot be
set as one of those stages. Ensure the clock is set and the door is closed prior to
setting the programme.
Alternatively, after you press the
Microwave button once, you can
turn the Timer/Weight/Auto
Menu dial to change the power
level.
To nd out the preset
time, press the Clock/Pre-
Set button once while the
microwave is still in the
preset state. It will last for
3 seconds and then return
to its original display.
Do not press the Start/+30Sec./
Conrm button at this stage.
4. Press the Clock/Pre-Set button to preset the
starting time for the cooking. The hour digits
will ash. Turn the Timer/Weight/Auto Menu
dial to adjust the starting time until the LED
display shows “13:00”.
5. Press the Clock/Pre-Set button to preset the
starting time for the cooking. The minute
digits will ash. Turn the Timer/Weight/Auto
Menu dial to adjust the starting time until the
LED display shows “13:30”.
6. Press the Start/+30Sec./Conrm button to
complete the setting and “:” will ash. The
microwave will sound when the count down
reaches the starting time and cooking will
start automatically.
7. Press the Stop/Clear button once to stop the
cooking. Press the Stop/Clear button again to
cancel the setting.
L17MSW13E_IB_130506_Shaun.indb 61 06/05/2013 11:23 AM