Manual Tuning
Allows you to make manual fine tuning adjustments if the channel reception is poor under analogue TV mode.
In the 1. TV menu, press the
buttons to select MANUAL TUNING and then
press the OK button or the
button.
Press the 2. buttons to change the following settings.
Channel To select a channel number for a particular
frequency through manual tuning.
Sound System To select TV sound system between: BG / I / DK / L.
(for AUTO & SECAM system only)
Colour System To select TV colour system between: AUTO / PAL /
SECAM. (not available for I sound system)
Auto Fine Tune
(AFT)
To fine tune the channel automatically when the
signal is weak.
Manual Tuning Performs manual search for analogue TV
programmes. Press the
buttons shortly to
adjust channel frequency, and press for a long
time to begin searching.
Press the 3. MENU button to save the setting and return back to the previous
menu.
Press the 4. EXIT button to exit the menu.
Channel Edit
Allows you to edit analogue TV programmes in the Channel List.
Press the 1. MENU button and then use the
buttons to select the TV menu
and then press the
button.
Press the 2.
buttons to select CHANNEL EDIT and then press the OK
button or the
button.
To add a channel to the favourite channel list3.
Press the a.
buttons to highlight a channel and then press the GREEN
button.
Press the b. GREEN button again to undo it.
To Skip
Press the a.
buttons to highlight a channel and then press the
YELLOW button.
Press the b. YELLOW button again to undo it.
To Next Page
Loading...
Need help?
General
