5
2. Choose a flat work surface for your microwave
away from heat sources such as radiators or
fires and away from cold areas. You should
allow a 10cm space all around the microwave
and 30cm above so that warm air can
escape from the vents during cooking – This
microwave is not designed to be built in.
Getting Ready
This microwave is designed for home use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make sure
there are no dents, and the door closes properly. A damaged microwave could allow microwave energy
to escape. Make sure that you have taken out all of the packaging from the inside of the microwave.
Please dispose of the plastic wrappings/ bags safely and keep out of the reach of babies and young
children.
3. Plug your microwave into a standard
household electrical socket (230 volt, 13 amp
rated). Avoid using a socket that also has an
adaptor and other equipment plugged in. Do
not use a multi adaptor.
4. Put the turntable ring inside the microwave
and place the glass turntable on top of the
ring. The turntable is shaped to sit securely on
the spindle. You must always use the turntable
and ring whenever you use the microwave.
Underside View
5. To protect your work surface, we recommend
that you fix some non-slip cushion pads (not
included) to the underside of the microwave.
Remove the turntable plate and
turntable support before turning the
microwave upside down.
30cm
10cm10cm
Clock/Weight
Convection
u
/
T
i
n
m
e
e
M
Clock/Weight
Convection
u
/
T
i
n
m
e
e
M
Clock/Weight
Convection
u
/
T
i
n
m
e
e
M
Clock/Weight
Convection
u
/
T
i
n
m
e
e
M
Clock/Weight
Convection
u
/
T
i
n
m
e
e
M
Clock/Weight
Convection
u
/
T
i
n
m
e
e
M
Clock/Weight
Convection
u
/
T
i
n
m
e
e
M
L25CS10_IB_GB_110303.indd 5 3/3/11 3:09 PM
To Next Page
Loading...
Need help?
General
