18
6. The display window will show the remaining
running time. “End” is displayed when the
programme is complete.
Wash Setting
First Time Use
Before the first use, run the machine empty with detergent using the Cotton 60°C programme.
This ensures any effects from the manufacturing process are removed.
Standard Washing
1. Pull the door handle and put the laundry in the
drum. Make sure no laundry gets caught in the
door.
2. Close the door. Press the Power button to switch
on the washing machine. Turn the Programme Dial
to select your wash programme. It will display the
operating time.
3. Select any Optional Functions.
4. Add detergent into the detergent drawer. The
quantity of detergent will depend on the amount
of laundry, the degree of soiling and the water
hardness. Use the amount of detergent suggested
on the packaging.
5. Press the Start/Pause button to start the washing.
Manual Soaking
To manually soak your laundry, press the Start/Pause button after 10 minutes of the wash
programme. The washing machine will suspend the laundry to soak in the water. After your
desired soaking time, press the Start/Pause button, the machine will continue the interrupted
programme.
• For pre-wash programme, detergent
should be added to both compartments
1 and 2.
• For other programmes, DO NOT add
detergent to compartment 1.
If the door is locked and you switched the
washing machine off - or if there’s a power
cut - it will stay locked for 1 minute until you
turn it back on again.
When you start the washing machine, the indicator will light up to confirm the
function is in progress. Once the washing machine has started, you can’t change the
programme.
To Next Page
Loading...
Need help?
General
