17
Setting the Timer to Turn Cooking Zones O
Using the Timer
You can set the timer up to 99 minutes. You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking zone off
when the set time is up.
• You can set it to turn one or more cooking zones off after the set time is up.
Using the Timer as a Minute Minder
Make sure the induction hob is turned ON. You can use the timer as a minute minder even if
you’re not selecting any cooking zones.
1. Touch the Timer Control. The indicator will show “10”
and the “0” will flash.
2. Set the digit by touching the Power/Timer Slider
Control. Touch the Timer Control to confirm. Then the
“1” will flash.
3. Set the digit and touch the Timer Control to confirm.
4. When the time is set, the timer will begin to count
down immediately. The display will show the remaining
time.
5. When the set time has elapsed, the timer will beep for
30 seconds and the indicator will show “– –”.
If the timer is set on one zone
1. Touch the Cooking Zone Selection Control that you wish
to set the timer on.
2. Follow steps 1 to 3 in “Using the timer as a minute minder”.
3. When the time is set, the timer will begin to count down
immediately. The display will show the remaining time. The red dot
next to the power level indicator will illuminate, indicating that the
zone is selected.
4. When cooking timer expires, the corresponding cooking zone will switch
off automatically.
Other cooking zones will keep operating if they are already
turned on previously.
LINDHOB15_IB_RC_150630_grace.indd 17 30/6/15 4:47 pm
To Next Page
