18
If the timer is set on more than one zone
1. Touch the Cooking Zone Selection Control that you wish
to set the timer on.
2. Follow steps 1 to 3 in “Using the timer as a minute minder”.
3. When the time is set for several cooking zones simultaneously,
decimal dot on the relevant cooking zones will be on. The display
will show the remaining time of the corresponding zone. The
corresponding zone will have flashing decimal.
4. When cooking timer expires, the corresponding cooking zone will
switch off automatically. Then the display will show the remaining
time of another corresponding zone. The corresponding zone will
have flashing decimal.
Other cooking zones will keep operating if they are already
turned on previously.
Cancelling the Timer
1. Touch the Cooking Zone Selection Control that you wish to cancel the timer.
2. Touch the Timer Control. The indicator will flash.
3. Set the timer to “00” by touching the Power/Timer Slider Control. The timer is cancelled.
LINDHOB15_IB_RC_150630_grace.indd 18 30/6/15 4:47 pm
To Next Page
