23
Failure Display and Inspection
If an operational abnormality occurs, the induction hob will automatically enter the protective
state and display a protective code. (see table below)
Protective Code Possible Causes What To Do
F3-F8 Temperature sensor failure Please contact the supplier.
F9-FE Temperature sensor failure Please contact the supplier.
E1/E2 Abnormal supply voltage Please inspect whether power supply is
normal.
Power on after the power supply is normal.
E3/E4 Abnormal temperature Please inspect the pot.
E5/E6 Bad induction hob heat
radiation
Please restart after the induction hob
cools down.
Never attempt to disassemble the unit by yourself.
Specications
Rated Voltage
220–240 V~
Rated Frequency
50/60 Hz
Overall Dimension (W x D X H)
590 x 520 x 60 mm
Power Consumption
7100 W
Features and specifications are subject to change without prior notice.
LINDHOB15_IB_RC_150630_grace.indd 23 30/6/15 4:47 pm
To Next Page
