Logitech G735 - Setup Instructions; Insert Microphone Connector; Turn On Headset; Connect LIGHTSPEED Receiver

3 sec
3 sec
4 ENGLISH
SETUP INSTRUCTIONS
1 Insert the microphone connector into the port on
the left ear cup. It is designed to t in one way.
2 Turn on the G735 headset by pressing and
holding the power button located on the left ear
cup for 3 seconds.
3 Insert the LIGHTSPEED receiver, with extender
and cable into the PC USB port. Receiver can be
used without the extender and cable by inserting
it directly into a USB port if desired.
4 Download and install G HUB software to
yourPC/MAC for the best gaming experience
(GHUB has onboarding story for features).
Gotowww.logitechG.com/ghub
1 2
3
4
www.logitechG.com/ghub