Logosol E5000 - Declaration of Conformity

Logosol Sawmill equipped with
E 4000 / E 5000 / E 8000
Declaration of Conformity
Product: E 4000 ref. no. 6602-000-0100
E 5000 ref. no. 6601-000-0005
E 8000 ref. no. 6603-000-0050
The manufacturer, Logosol AB, Industrigatan13, S-871 53
Härnösand, Sweden, tel. +46 611 18285, hereby declares
that the electric saw units E 4000, ref. no. 6602-000-0100,
E 5000, ref. no. 6601-000-0005, and E 8000, ref. no.
6603-000-0050, are manufactured in accordance with:
Machinery Directive 98/37/EG, EMC directive 2004/108/
EG, and LVD-directive 2006/95/EG,
and that it is manufactured in accordance with the following
harmonized standards: EN ISO 12100-1, -2:2003, EN
60204-1:2006, EN 61000-6-1, -3.
The electric saw units E 4000, E 5000 and E 8000 may
only be used as saw units on Logosol's sawmills M5, M6
and M7.
Härnösand, 26 February 2008
Bengt-Olov Byström, Managing Director
Circuit diagram US-version 220 V
Circuit diagram SE-version 400 V