EasyManua.ls Logo

LONCIN 168F-2 - User Manual

LONCIN 168F-2
219 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gasoline Engine Owners Manual 3
Benzinmotor Gebrauchsanleitung 44
Moteur dessence Mode demplois 88
Benzinemotor Handleiding 134
Bensinmotor Användarhandbok 178
160F 168F-1 168F-2 170F
173F 177F 182F 188F 190F
G120F·G160F·G180F
·G200F·G210F
G240F·G270F·G340F·G390F·G420F

Questions and Answers

  • B
    Bradley JonesAug 17, 2025
    Why my LONCIN 168F-2 Engine will not start?
    • B
      Bryan WrightAug 17, 2025
      If your LONCIN Engine won't start, several factors could be the cause. First, check if the battery is discharged and recharge it if necessary. Ensure the fuel valve is in the ON position. If the engine is cold, make sure the choke is CLOSED; if warm, leave it OPEN. Verify the engine switch is set to ON and that you have sufficient fuel. If the fuel is old or bad, drain the tank and carburetor, then refuel with fresh gasoline. Inspect the spark plugs for faults, fouling, or incorrect gaps; gap or replace them as needed. If the spark plugs are wet, dry and reinstall them, then start the engine with the throttle lever in the FAST position. For more complex issues like a clogged fuel filter, carburetor malfunction, or valve problems, consider replacing or repairing the faulty components.
  • B
    Brenda WiseAug 19, 2025
    Why LONCIN Engine lacks power?
    • J
      Jason BrooksAug 20, 2025
      If your LONCIN Engine lacks power, start by checking the filter elements for clogs and clean or replace them as needed. Ensure that the engine has enough fuel by refueling if necessary. If the fuel is old or of poor quality, drain the fuel tank and carburetor, and then refuel with fresh gasoline. In case of a clogged fuel filter, carburetor malfunction, ignition malfunction, or a stuck valve, replace or repair the faulty components.
  • K
    Kathy GutierrezAug 23, 2025
    What to do if LONCIN 168F-2 Engine spark plugs wet with fuel?
    • M
      millerbonnieAug 23, 2025
      If your LONCIN Engine's spark plugs are wet with fuel, it indicates a flooded engine. To resolve this, dry and reinstall the spark plugs. Then, start the engine with the throttle lever in the FAST position.
  • M
    Melissa WallaceAug 26, 2025
    What to do if LONCIN 168F-2 has bad fuel?
    • A
      amanda44Aug 26, 2025
      If the fuel in your LONCIN Engine is bad, it could be due to the engine being stored without treating or draining the gasoline, or refuelling with bad gasoline. The solution is to drain the fuel tank and carburetor, then refuel with fresh gasoline.
  • J
    Jennifer HarperAug 28, 2025
    How to fix faulty spark plugs in LONCIN Engine?
    • D
      David ComptonAug 28, 2025
      If the spark plugs in your LONCIN Engine are faulty, fouled, or improperly gapped, gap or replace them.
  • M
    Miranda GarciaAug 31, 2025
    What to do if LONCIN 168F-2 Engine is out of fuel?
    • W
      William WatkinsAug 31, 2025
      If your LONCIN Engine is out of fuel, refuel it.
  • D
    Dylan OwensSep 3, 2025
    What to do if LONCIN Engine fuel valve is off?
    • J
      Justin JonesSep 3, 2025
      If the fuel valve of your LONCIN Engine is OFF, move the lever to the ON position.
  • U
    usmithSep 5, 2025
    What to do if LONCIN 168F-2 Engine switch is off?
    • P
      parrishautumnSep 5, 2025
      If the engine switch of your LONCIN Engine is OFF, turn the engine switch to ON.
  • R
    Robert AndersonSep 8, 2025
    What to do if LONCIN Engine choke is open?
    • T
      truizSep 8, 2025
      If the choke on your LONCIN Engine is OPEN, move the lever to CLOSE unless the engine is warm.
  • T
    Tiffany FordSep 12, 2025
    How to clean LONCIN 168F-2 Engine clogged filter element(s)?
    • S
      scott97Sep 12, 2025
      If the filter element(s) in your LONCIN Engine are clogged, clean or replace them.

Summary

Safety Symbol Definitions

WARNING

Indicates serious injury or death will result if instructions are not followed.

DANGER

Indicates a strong possibility of serious injury or death if instructions are not followed.

CAUTION

Indicates a possibility of minor injury if instructions are not followed.

ENGINE SAFETY

Refuel With Care

Guidelines for safe refueling to prevent fire and explosion hazards.

Carbon Monoxide Hazard

Awareness of toxic carbon monoxide gas produced by exhaust and ventilation needs.

3. CONTROLS

CONTROLS - Additional

4. CHECK BEFORE OPERATION

5. OPERATION

SAFE OPERATING PRECAUTIONS

Reviewing important safety information and warnings before operating the engine for the first time.

STARTING THE ENGINE

Step-by-step guide to starting the engine, including fuel valve and choke settings.

STARTING THE ENGINE Procedures

Adjust Throttle Lever for Starting

Adjusting the throttle lever position for optimal starting.

Engage Engine Switch

Activating the engine's ignition system by turning the switch to the ON position.

Operate Starter Grip

Using the recoil starter grip to crank and start the engine.

ENGINE STARTING & STOPPING

Adjust Choke as Engine Warms

Gradually moving the choke lever to OPEN as the engine warms up.

STOPPING THE ENGINE

Procedures for stopping the engine, both in emergency and normal conditions.

ENGINE STOPPING & SPEED SETTING

Turn Engine Switch OFF

Shutting down the engine by turning the engine switch to OFF.

Turn Fuel Valve OFF

Closing the fuel valve to stop fuel flow after the engine is off.

6. MAINTENANCE

MAINTENANCE SAFETY

Essential safety precautions to follow during maintenance procedures.

General Safety Precautions

General safety rules to follow before starting any maintenance or repair work.

MAINTENANCE Safety Details

Carbon Monoxide Hazard Warning

Warning about carbon monoxide exposure and the need for ventilation during operation.

MAINTENANCE SCHEDULE

Table outlining regular service intervals and tasks for engine maintenance.

MAINTENANCE: Refueling and Oil Level

REFUELING Procedures

Details on fuel tank capacities and safe refueling procedures.

ENGINE OIL LEVEL CHECK

Procedure for checking the engine oil level using the dipstick.

MAINTENANCE: Oil Change and Gear Oil

ENGINE OIL CHANGE

Step-by-step instructions for draining and refilling engine oil.

MAINTENANCE: Air Filter Inspection

MAINTENANCE: Dual-Filter Air Cleaner Service

MAINTENANCE: Oil Bath Air Cleaner and Sediment Cup

MAINTENANCE: Spark Plug and Idle Speed

7. STORAGE;TRANSPORTING

STORING YOUR ENGINE

Preparation steps for storing the engine to prevent damage and corrosion.

STORAGE: Fuel Treatment and Draining

STORAGE;TRANSPORTING: Transport Precautions

8. TROUBLESHOOTING

ENGINE WILL NOT START

Common causes and corrections for the engine failing to start.

ENGINE LACKS POWER

Troubleshooting steps for engines experiencing reduced power output.

Technical Info: High Altitude Operation

10. Specifications

Detailed Engine Model Specifications (Part 1)

Detailed Engine Model Specifications (Part 2)

11. Wiring Diagrams

Wiring Diagram Variations

LONCIN 168F-2 Specifications

General IconGeneral
Displacement196 cc
Bore x Stroke68 mm x 54 mm
Compression Ratio8.5:1
Oil Capacity0.6 L
Starting SystemRecoil start
Weight16 kg
Fuel TypeUnleaded gasoline
Lubrication SystemSplash
Cooling SystemAir-cooled
Engine TypeSingle cylinder, 4-stroke, air-cooled
Max Power6.5 HP (4.8 kW) / 3600 rpm
Rated Power Output4.1 kW / 3600 rpm
Fuel Tank Capacity3.6 L
Ignition SystemTransistorized magneto ignition
Fuel Consumption≤395 g/kWh

Related product manuals