LONCIN LC170F - ENGINE OPERATION; Operation Safety Advice; Engine Starting Procedure; Choke Lever Adjustment During Warm-up

OPERATION
20
4. Set the ignition switch to ON.
5. Pull the cranking rope starter.
Cranking rope starter:
Slightly pull the handle of the cranking rope starter until you
feel some resistance and then pull it vigorously.
Let the cranking rope handle slowly return to its starting
position.
6. If the choke lever for cold starting the engine was in the
CLOSED position, move it slowly to the OPEN position while
the engine warms up.
STOPPING THE ENGINE
To stop the engine in an emergency situation simply set the
ignition switch to OFF.
Proceed as follows under normal conditions:
1. Set the throttle lever to SLOW.
2. Turn the ignition switch to OFF.
3. Set the fuel valve to OFF.
ADJUSTING THE ENGINE SPEED
Set the throttle lever to FAST.
Set the throttle lever to the required speed.
IGNITION SWITCH
OFF
ON
CRANKING
CHOKE LEVER
OPEN
THROTTLE
SLOW
IGNITION SWITCH
OFF
ON
FUEL
VALVE
OFF
THROTTLE
SLOW
FAST