Engine Maintenance
- 12 -
Replace oil in crankcase
After warming up the engine, it is easy to drain the engine oil to ensure
the engine oil is rapidly drained out.
1) Place a container under the engine for containing used oil.. Then, remove the oil ruler
and loosen the draining screw and washer,.
2) After drainage of used oil, reinstall the draining screw and washer and tighten them.
In view of environmental protection, please take a proper way to dispose the waste oil.
It is recommended to send the waste oil to the local service station or recycle center.
Never throw waste oil barrel to refuse tip, dump the waste oil on ground or in ditches.
3) Place the engine in level position, refill recommended oil to the top line.
The filling capacity of the engine：
Not replace fine oil filter：1.3L
Replace fine oil filter：1.5L
4) Reinstall the oil ruler and tighten filler cap.
Recommended engine oil：
Engine oil for 4-stroke engine:
API classification: SE、SF or equivalent to SG, SAE 10W-30.
If the range of temperature change in your area is limited in the above chart，this oil
grade can be selected according to it.
Maintain air cleaner
If the air cleaner is dirty, it affects air inlet, the power of engine reduced. If the running
Environment
temperature
To Next Page
Loading...
