Use of Engine
- 4 -
3 Use of engine
1) Engine switch
The engine switch is a ignition circuit for starting and stopping
engine.
When the engine switch turns to “on” position, the engine runs,
when the switch turns to “off” position, the engine stops.
2) Choke button
The function of the choke button is to open or close the choke
valve in the carbureter. When pull out the button, the choke valve
is closed, in such case, it is prone to start the coldengine. When
the engine works normally, it is required to push the choke button
in, that is to say the choke valve is in opening position,
3) Regulation lever
Regulate the position of the regulation lever to get the desired speed.
Off
On
Choke button
Low High
To Next Page
Loading...
