Do not twist the sponge
material when squeezing it.
9. Allow the sponge material to dry thor-
oughly. Inspect the sponge material and re-
place it if damaged.
10. Pull the sponge material over its frame.
11. Reinstall the air filter element.
12. Install the air filter case cover by hooking
the holders onto the cover.
13. Close the front panel
The air filter element should be cleaned eve-
ry20–40 hours. It should be cleaned and lu-
bricated more often if the vehicle is operated
in extremely dusty areas. Each time air filter
element maintenance is performed, check
the air inlet to the air filter case for obstruc-
tions. Check the air filter element rubber joint
to the throttle body and manifold fittings for
an air- tight seal. Tighten all fittings securely to
avoid the possibility of unfiltered air entering
the engine.
Never operate the engine with the air filter
element removed. This will allow unfiltered air
to enter, causing rapid engine wear and possi-
ble engine damage. Additionally, operation
without the air filter element will affect the
fuel injection system with subsequent poor
performance and possible engine overheating.
To Next Page
Loading...
Need help?
General
