114
9. Lower the cargo bed.
10. Reinstall the quick fastener screws, bolts
and nuts and then tighten the nuts to the
specified torque.
Troubleshooting
Although BMS vehicles receive an inspection
before shipment from the factory, trouble may
occur during operation. Any problem in the fuel,
compression, or ignition systems can cause
poor starting and loss of power. The trouble-
shooting chart describes a quick, easy proce-
dure for making checks. If your vehicle requires
any repair, take it to a BMS dealer.
The skilled technicians at a BMS dealer- ship
have the tools, experience, and know- how to
properly service your vehicle. Use only genuine
BMS parts on your vehicle. Imitation parts may
look like BMS parts, but they are often inferior.
Consequently, they have a shorter service life
and can lead to expensive repair bills.
To Next Page
Loading...
Need help?
General
