90
Differential Gear Oil
Checking the differential gear oil level
1. Park the vehicle on a level surface.
2. Remove the differential gear oil filler bolt
and its gasket, and then check the oil level.
It should be up to the brim of the filler
hole.
3. If the level is low, add sufficient oil of the
recommended type to raise it to the
specified level.
Be sure no for-
eign material enters the differential gear
case.
4. Check the gasket for damage, and re- place
it if necessary.
5. Reinstall the differential gear oil filler bolt
and its gasket, and then tighten the bolt
to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
To Next Page
Loading...
Need help?
General
