This warning light comes on or flashes if a
problem is detected in the electrical circuit
monitoring the engine. When this occurs, have
a BMS dealer check the self-diagnosis system.
(See Chapter 4 for an explanation of the
self-diagnosis device.)
The electrical circuit of the warning light can be
checked by turning the key to “ON”. If the
warning light does not come on initially when
the key is turned to “ON”, or if the warning light
remains on, have a BMS dealer check the elec-
trical circuit.
Self-diagnosis device
This model is equipped with a self-diagnosis
device for various electrical circuits.
If a problem is detected in any of those circuits,
the engine trouble warning light comes on or
flashes, and the multi-function display indicates
an error code.
If the multi-function display indicates an error
code, note the code number, and then have a
BMS dealer check the vehicle.
If the multi-function display indicates an error
code, the vehicle should be checked as soon as
possible in order to avoid engine damage.
To Next Page
Loading...
Need help?
General
