Long range MT4300 - Target TAG Counter System; Target TAG System Overview; Switching Operating Modes

Switching Between Target TAG and Tournament Modes
The MT4300 is equipped with the Target TA system which allows users to re only targets that
are paid for. When the MT4300 is in Target TA mode, users need to have a valid card to launch
targets with the MT4300 or to preload targets onto the unit. The MT4300 also stores each customers
transaction in its memory. se the Service Cards to retrieve the data from the controller and transfer
it to your PC 38.
The MT4300 makes use of a Target Bank which will always indicate the amount of targets left in the
bank. When the bank reaches ero, the unit will no longer launch targets.
ach MT4300 that is used with the Target TA system will be preprogrammed with your unique user
I so it will recognie only your cards.
Target TAG Counter System
ou may turn o󰀨 Target TAG mode and allow targets to be launched freely without a card. To do this,
you must change the mode in the System Setup Menu.
1
2
3
Select Option 4, System Setup
From the Main Menu, press button 4 to select
the System Setup option.
Enter Your 4-Digit Password
The MT4300 ships with a default password
of 1234. If you have already changed the
password, input the 4-digits and press NTR.
Select Option 4, Chg Mode
From the System Setup Menu, press 4 which
corresponds with Chg Mode.
4
5
System Setup
Voice Mode
6
Blue T Mode
Enter Password
1234
30
Chg Mode
5
6
7
Set Clock
Backlight
Target Mgt
4