3
Contents
1. Introduction 4
2. Safety instructions 5
3. Description of the parts 6
4. Fluid 8
4.1 General Notes
4.2 Changing the fluid container
5. Operating the Viper nt 8
5.1 Selecting the location
5.2 Putting into operation
5.3 Switching the device off
5.4 Control choices
5.4.1 Control via DMX 512
5.4.1.1 Adjusting the DMX start address
5.4.2 Control via 0 - 10 Volt (+) DC
5.4.3 Stand alone mode
5.4.4 Control via Radio remote
5.5 Operating with internal timer
5.5.1 Auto start
5.6 Wiring of the connectors
6. Cleaning, Care and Maintenance 14
7. Troubleshooting 15
8. Specifications 16
9. Warranty Conditions 17
To Next Page
Loading...
