LORCH M-Pro Performance M 300 - Tiptronic Functionality

Start-up
- 50 - 10.13
13.7 Mode Manual
Manual welding mode allows welding inde-
pendant of characteristic lines.
 Press key menu 48.
 Select menu option „characteristics“ by
turning operation knob 52.
 Conrm menu option „characteristics“ by
pressing operation knob 52.
 Select menu option „manual“ by turning
operation knowb 52.
 Conrm manue option „manual“ by press-
ing operation knob 52.
 Press key 46, 50 or 51 to exit menu and
return to standard display.
Abb. 22: Manual mode
13.8 Secondary parameters
 Press key secondary parameter 46 or 51
to open the secondaryparamenter menu.
 Select the required secondary parameter
by turning operation knob 52.
 Conrm set secondary parameter by
pressing operation knob 52.
 Set parameter value 72 as required by
turning operation knob 52.
70 7271
Abb. 23: Secondary parameters
70 Symbol secondary parameter
71 Factory setting
72 Parameter value
 Conrm parameter value 72 by pressing
operation knob 52.
 Press key 46, 50 or 51 to exit menu and
return to standard display.