page 63
Read out via QR-code
With a ControlPro front panel the machine data can be transferred via QR-code. A smartphone with installed QR-
code scanner app is required for this. To read out the data follow these steps:
- switch o the machine
- press the menu button and keep it pressed
- switch on the machine
- release the menu button
The QR-code is displayed at the front and can be scanned with a smartphone.
Since software version 2.02, the start-menu can also be accessed without switching o the machine:
- press and hold the keys A2 and A32
- after about 3 seconds the start-menu is displayed
To Next Page
Loading...
Need help?
General
