LORCH Saprom S - Pc-board DP-UFI; DP-UFI Board Functions; DP-UFI Measuring Points

22
Pc-board DP-UFI
The pc-board DK-UFI is for wiring the welding sockets.
Functions
- wiring welding sockets
- providing output voltage
Measuring points
Picture Pc-board DP-UFI
Since the following serial no. the pc-board DP-UFI was replaced by the boards DP-UFI-BO and DP-EMV:
designation measure point result
secondary output voltage
(nm MMA mode)
X3
X2
+
GND
ca. 81V DC
socket „+“
socket „-“
+
GND
ca. 81V DC
X1/1
X1/2
+
GND
ca. 81V DC
machine serial no. date
Saprom S3 405-1525-001 22.06.2005
Saprom S5 403-1525-001 22.06.2005
Saprom S8 404-1525-001 22.06.2005
Saprom S3 mobile 406-1524-001 24.06.2005