To Next PageTo Next Page
Need help?Do you have a question about the LORCH HandyTIG 180 DC Basic Plus and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Welding Current Range | 10 - 180 A |
| Duty Cycle | 60% at 180 A |
| Protection Class | IP 23 |
| Insulation Class | F |
| Open Circuit Voltage | 70 V |
| Power Supply | 1-phase |
| Pulse Function | Yes |
| Hot Start | Yes |
| Arc Force Control | Yes |
| Welding Process | MMA |
Steps for connecting the device to the power supply or generator.
How to navigate and adjust secondary welding parameters.
Steps to start and operate the machine for electrode welding.
Steps to start and operate the machine for TIG welding.
List of codes, symptoms, causes, and remedies for ControlPro model.
List of symptoms, causes, and remedies for BasicPlus model.
